Basic Pant layout: Higher Efficiency Method

Pant

Basic pant is the most common and popular garments. The garments wear both of male-female. It wears ankles from the waist. A pant also names trousers. It may be made by woven fabric like denim, jeans, cord, etc. knit fabrics like single jersey, double jersey, etc.

Construction Break Down:

Front part

Seam- 2

Pocketing- 2

Front pocket piping- 2

Double fly- 1

Single fly- 1

Coin pocket - 1

Front part- 2

Back part

Back part-2

Back Pocket-2

Back Yoke-2

Assemble

Waist belt- 2

Waist loop - 1

Process Break Down:

Generally, the process breakdown of basic pants depends on the style of these pants. There are shown a basic pant that is most used.

Back Part:

1. Bk Pkt O/L- O/L-4
2. Bk Pkt Mouth Rolling- DND
3. Bk Pkt Ironing- I/M
4. Bk Pkt Join- SND
5. Bk Pkt Top Stitch (T/S)- SND
6. Back Yoke Attache- FOA ( There will be used the folder)
7. Back Rise O/L- O/L-5
8. Back Rise Attached- FOA (There will be used the folder)
9. Back Part Separate  O/L- 5 ( It is done for higher quality the pant)

Front Pocket:

1. Coin Pkt Rolling- DND
2. Coin Pkt Attached- DND
3. Seam O/L-O/L-4
4. Seam Join with Pocketing- SND
5. Fr Pkt Bag make- O/L-4
6. Pkt Bag T/S-SND
7. Fr Pkt Join with Piping- SND (If the buyer demand)
8. Pkt Bag Join with Fr Pocket- V.T
9. Fr Pkt Mouth Rolling- DND
10. Fr Pkt (H+V) Tack- SND
11. Fr Rise Attached- DND

Front Part:

1. Single Fly O/L- O/L-4
2. Single Fly Join-SND
3. Single Fly T/S- SDN
4. Zipper Join with S/F- SND
5. J-Stitch
6. Double Fly Tack- SND
7. Double Fly Turnover- Turnover M/C
8. Double Fly O/L- O/L-4
9. Double Fly Join with Zipper- SND
10. Double Fly T/S- SND
11. Front Part Separate - O/L- 5 ( It is done for higher quality the pant)
12. Waist Belt Mark- H/W
13. Waist Belt Hole- Button Holing

Assembly:

1. Assembly- H/W
2. InSeam O/L- O/L-5
3. InSeam T/S-FOA
4. Side Seam O/L- O/L-5
5. Side Seam T/S-FOA
6. Cord stitch Inside- SND
7. Cord stitch Outside- SND
8. Main Label Attached- SND
9. Care Label & other Label Attached-SND
10. Waist Belt Serving- VT
11. Waist Loop Position Mark-H/W
12. Waist Belt Attached- Kansai
13. Waist Belt Mouth Open-H/W
14. Waist Belt Mouth Close- SND
15. Waist Loop Make- F.LOCK
16. Waist Loop Upper Tack- SND
17. Waist Loop Inside Tack- SND
18. Diamond Tack-SND
19. Interforcement Attached- SND
20. Bottom Hem-Heming M/C
21. Bar Tac- BT

Process and Machine Layout:

Generally, process layout and Machine layout depends on the style of the pant or factory variation. it will be changed for different styles or factories.

BK PKT O/L	BK PKT MOUTH ROLLING	TEXTILE FUTURES	S/F O/L	D/F TACK
O/L-4	DND		OL-4	SND
BK PKT IRON	BK PKT JOIN		D/F TURN OVER	D/F O/L
I/M	SND		TURNOVER M/C	OL-4
BK PKT T/S	BACK YOKE ATTACHED		COIN PKT ROLLING	COIN PKT JOIN
SND	FOA		DND	O/L-4
BK RISE O/L	BK RISE T/S		FR PKT SEAM OL	SEAM JOIN WITH PKTING
O/L-5	FOA		O/L-4	O/L-4
BACK PART SEPARATE	INSEAM JOIN		PKT BAG MAKE	PKT BAG TACK & TURN OVER
OL-5	OL-5		OL-4	SND
ASSEMBLY	INSEAM T/S		S/F JOIN & BELT TACK	S/F T/S
H/W	FOA		SND	SND
SIDE SEAM JOIN	SIDE SEAM T/S		S/F JOIN WITH ZIPPER	D/F JOIN WITH ZIPPER
O/L-5	FOA		SND	SND
CORD STITCH INSIDE	CORD STITCH OUTSIDE		ZIPPER T/S  OR 1 /4	J-STITCH
SND	SND		SND	DND
		TEXTILE FUTURES
MAIN LABEL JOIN	CARE LABEL & OTHER LABEL ATTACHED		FR PKT JOIN	FR PKT MOUTH ROLLING
SND	SND		DND	SND
WAIST BELT SERVING	WAIST LOOP POSITION MARK		FR PKT (H+V) TACK	FR RISE OL
VT	H/W		SND	OL-5
WAIST BELT ATTACHED	WAIST BELT MOUTH UNSTITCH		FR RISE ATTACHED	W/B MARK
KANSAI	H/W		DND	H/W
WAIST BELT MOUTH CLOSE	LOOP MAKE & CUTT		W/B COTTON HOLE	FR PART SPARATE O/L
SND	F.LOCK		B.HOLING	OL-5
WAIST LOOP UPPER TACK	WAIST LOOP INSIDE TACK		INTERFOCEMENT ATTACHED	BOTTOM HEM
SND	SND		SND	BOTTOM HEMING
MOUTH CLOSE	DIAMOND MAKE		BAR TACK LOOP	BAR TACK BODY
SND	SND		BAR TACK	BAR TACK

Required Numbers of Machine: